Home
Resource
Development of high band gap materials for tandem solar cells and simulation studies on mechanical tandem solar cells
PDF
PDF format is widely accepted and good for printing.
Plug-in required
PDF-1(4.79 MB)
Citation & Export
View Usage Statistics
Staff View

Citation & Export
Hide

Simple citation

Vijayakumar, Vishnuvardhanan. Development of high band gap materials for tandem solar cells and simulation studies on mechanical tandem solar cells. Retrieved from https://doi.org/doi:10.7282/T3P26W58

Export

Click here for information about Citation Management Tools at Rutgers.

Statistics
Hide

Description

TitleDevelopment of high band gap materials for tandem solar cells and simulation studies on mechanical tandem solar cells
NameVijayakumar, Vishnuvardhanan (author); Birnie, Dunbar P (chair); Mann, Adrian (internal member); Feldman, Leonard (internal member); Bruce, Allan (outside member); Rutgers University; Graduate School - New Brunswick
Date Created2013
Other Date2013-10 (degree)
SubjectMaterials Science and Engineering, Solar cells, Solar cells--Costs
Extentxviii, 122 p. : ill.
DescriptionDevelopment of low cost, high efficiency tandem solar cells is essential for large scale adoption of solar energy especially in densely populated regions of the world. In this thesis four-terminal mechanical (stack like) tandem solar cells were evaluated using detailed simulation models and design criteria for selecting candidate materials were established. Since silicon solar cells are low cost and have a multi-giga watt global manufacturing and supply chain capacity already in place then only tandem stacks incorporating silicon as one of the layers in the device was investigated. Two candidate materials which have high band gaps that could be used as top cells in the mechanical tandem device were explored as part of the thesis. Dye-sensitized solar cells (DSSC) sensitized with N719 dye (one of the candidates for the top cell) were fabricated with the goal of enabling a flexible processing path to lower cost. Stainless steel (SS) mesh substrates were used to fabricate anodes for flexible DSSC in order to evaluate them as replacements for more expensive Transparent Conducting Oxides (TCO's). Loss mechanisms in DSSC's due to SS mesh oxidation were quantified and protective coatings to prevent oxidation of SS mesh were developed. The second material which was evaluated for use as the top cell was copper zinc tin sulfide (CZTS). CZTS was deposited through a solution deposition route. Detailed investigations were done on the deposited films to understand the chemistry, crystal structure and its opto-electronic properties. Deposited CZTS films were found to be highly crystalline in <112> direction. The films had a direct band gap of 1.5 eV with absorption coefficient greater than 104 cm-1 in agreement with published values. In the second part of the thesis detailed electrical and optical simulation models of the mechanical tandem solar cells were developed based on the most up-to-date materials physical constants available for each layer. The modeling was used to quantify the various theoretical and practical loss mechanisms in tandem devices. Two configurations were evaluated, first was silicon / germanium tandem cell and the second was gallium arsenide / silicon tandem cell. The simulation models were validated by their close match to the performance of experimental standalone solar cells devices reported in the literature. Finally the efficiency limits of the present generation of high band gap solar cells were discussed. Voltage and current loss of the high band gap solar cells were compared with present generation silicon solar cells and challenges in improving their efficiencies were described.
NotePh.D.
NoteIncludes bibliographical references
Noteby Vishnuvardhanan Vijayakumar
Genretheses, ETD doctoral
Persistent URLhttps://doi.org/doi:10.7282/T3P26W58
Languageeng
CollectionGraduate School - New Brunswick Electronic Theses and Dissertations
Organization NameRutgers, The State University of New Jersey
RightsThe author owns the copyright to this work.
Version 8.5.5
Rutgers University Libraries - Copyright ©2024