TY - JOUR TI - Development of high band gap materials for tandem solar cells and simulation studies on mechanical tandem solar cells DO - https://doi.org/doi:10.7282/T3P26W58 PY - 2013 AB - Development of low cost, high efficiency tandem solar cells is essential for large scale adoption of solar energy especially in densely populated regions of the world. In this thesis four-terminal mechanical (stack like) tandem solar cells were evaluated using detailed simulation models and design criteria for selecting candidate materials were established. Since silicon solar cells are low cost and have a multi-giga watt global manufacturing and supply chain capacity already in place then only tandem stacks incorporating silicon as one of the layers in the device was investigated. Two candidate materials which have high band gaps that could be used as top cells in the mechanical tandem device were explored as part of the thesis. Dye-sensitized solar cells (DSSC) sensitized with N719 dye (one of the candidates for the top cell) were fabricated with the goal of enabling a flexible processing path to lower cost. Stainless steel (SS) mesh substrates were used to fabricate anodes for flexible DSSC in order to evaluate them as replacements for more expensive Transparent Conducting Oxides (TCO's). Loss mechanisms in DSSC's due to SS mesh oxidation were quantified and protective coatings to prevent oxidation of SS mesh were developed. The second material which was evaluated for use as the top cell was copper zinc tin sulfide (CZTS). CZTS was deposited through a solution deposition route. Detailed investigations were done on the deposited films to understand the chemistry, crystal structure and its opto-electronic properties. Deposited CZTS films were found to be highly crystalline in <112> direction. The films had a direct band gap of 1.5 eV with absorption coefficient greater than 104 cm-1 in agreement with published values. In the second part of the thesis detailed electrical and optical simulation models of the mechanical tandem solar cells were developed based on the most up-to-date materials physical constants available for each layer. The modeling was used to quantify the various theoretical and practical loss mechanisms in tandem devices. Two configurations were evaluated, first was silicon / germanium tandem cell and the second was gallium arsenide / silicon tandem cell. The simulation models were validated by their close match to the performance of experimental standalone solar cells devices reported in the literature. Finally the efficiency limits of the present generation of high band gap solar cells were discussed. Voltage and current loss of the high band gap solar cells were compared with present generation silicon solar cells and challenges in improving their efficiencies were described. KW - Materials Science and Engineering KW - Solar cells KW - Solar cells--Costs LA - eng ER -