Staff View
Design and optimization of a light-emitting diode projection micro-stereolithography three-dimensional manufacturing system

Descriptive

TypeOfResource
Text
TitleInfo
Title
Design and optimization of a light-emitting diode projection micro-stereolithography three-dimensional manufacturing system
Name (type = corporate); (authority = RutgersOrg-Department)
NamePart
Mechanical and Aerospace Engineering
Name (type = corporate); (authority = RutgersOrg-School)
NamePart
School of Engineering
Genre (authority = RULIB-FS)
Article, Refereed
Genre (authority = NISO JAV)
Version of Record (VoR)
Note (type = peerReview)
Peer reviewed
OriginInfo
DateIssued (encoding = w3cdtf); (keyDate = yes)
2012
Abstract (type = Abstract)
The rapid manufacture of complex three-dimensional micro-scale components has eluded researchers for decades. Several additive manufacturing options have been limited by either speed or the ability to fabricate true three-dimensional structures. Projection micro-stereolithography (PμSL) is a low cost, high throughput additive fabrication technique capable of generating three-dimensional microstructures in a bottom-up, layer by layer fashion. The PμSL system is reliable and capable of manufacturing a variety of highly complex, three-dimensional structures from micro- to meso-scales with micro-scale architecture and submicron precision. Our PμSL system utilizes a reconfigurable digital mask and a 395 nm light-emitting diode (LED) array to polymerize a liquid monomer in a layer-by-layer manufacturing process. This paper discusses the critical process parameters that influence polymerization depth and structure quality. Experimental characterization and performance of the LED-based PμSL system for fabricating highly complex three-dimensional structures for a large range of applications is presented.
Language
LanguageTerm (authority = ISO 639-3:2007); (type = text)
English
PhysicalDescription
InternetMediaType
application/pdf
Extent
7 p.
Extension
DescriptiveEvent
Type
Citation
DateTime (encoding = w3cdtf)
2012
AssociatedObject
Name
Review of Scientific Instruments
Type
Journal
Relationship
Has part
Detail
125001-1-125001-6
Identifier (type = volume and issue)
83(12)
Reference (type = url)
http://dx.doi.org/10.1063/1.4769050
Subject (authority = local)
Topic
Polymerization
Subject (authority = local)
Topic
Polymers
Subject (authority = local)
Topic
Manufacturing
Subject (authority = local)
Topic
Ultraviolet light
Subject (authority = local)
Topic
Light emitting diodes
Name (type = personal)
NamePart (type = family)
Zheng
NamePart (type = given)
Xiaoyu
Affiliation
Lawrence Livermore National Laboratory
Role
RoleTerm (type = text); (authority = marcrt)
author
Name (type = personal)
NamePart (type = family)
Deotte
NamePart (type = given)
Joshua
Affiliation
Lawrence Livermore National Laboratory
Role
RoleTerm (type = text); (authority = marcrt)
author
Name (type = personal)
NamePart (type = family)
Alonso
NamePart (type = given)
Matthew P.
Affiliation
Lawrence Livermore National Laboratory; University of Illinois at Urbana Champaign
Role
RoleTerm (type = text); (authority = marcrt)
author
Name (type = personal)
NamePart (type = family)
Farquar
NamePart (type = given)
George R.
Affiliation
Lawrence Livermore National Laboratory
Role
RoleTerm (type = text); (authority = marcrt)
author
Name (type = personal)
NamePart (type = family)
Weisgraber
NamePart (type = given)
Todd H.
Affiliation
Lawrence Livermore National Laboratory
Role
RoleTerm (type = text); (authority = marcrt)
author
Name (type = personal)
NamePart (type = family)
Gemberling
NamePart (type = given)
Steven
Affiliation
Lawrence Livermore National Laboratory
Role
RoleTerm (type = text); (authority = marcrt)
author
Name (type = personal)
NamePart (type = family)
Lee
NamePart (type = given)
Howon
Affiliation
Mechanical and Aerospace Engineering, Rutgers University
Role
RoleTerm (type = text); (authority = marcrt)
author
Name (type = personal)
NamePart (type = family)
Fang
NamePart (type = given)
Nicholas X.
Affiliation
Massachusetts Institute of Technology
Role
RoleTerm (type = text); (authority = marcrt)
author
Name (type = personal)
NamePart (type = family)
Spadaccini
NamePart (type = given)
Christopher M.
Affiliation
Lawrence Livermore National Laboratory
Role
RoleTerm (type = text); (authority = marcrt)
author
RelatedItem (type = host)
TitleInfo
Title
Lee, Howon
Identifier (type = local)
rucore30172600001
Location
PhysicalLocation (authority = marcorg); (displayLabel = Rutgers, The State University of New Jersey)
NjNbRU
Identifier (type = doi)
doi:10.7282/T31838SX
Back to the top

Rights

RightsDeclaration (AUTHORITY = FS); (ID = rulibRdec0004)
Copyright for scholarly resources published in RUcore is retained by the copyright holder. By virtue of its appearance in this open access medium, you are free to use this resource, with proper attribution, in educational and other non-commercial settings. Other uses, such as reproduction or republication, may require the permission of the copyright holder.
Copyright
Status
Copyright protected
Availability
Status
Open
Reason
Permission or license
RightsEvent
Type
Permission or license
AssociatedObject
Type
License
Name
Multiple author license v. 1
Detail
I hereby grant to Rutgers, The State University of New Jersey (Rutgers) the non-exclusive right to retain, reproduce, and distribute the deposited work (Work) in whole or in part, in and from its electronic format, without fee. This agreement does not represent a transfer of copyright to Rutgers.Rutgers may make and keep more than one copy of the Work for purposes of security, backup, preservation, and access and may migrate the Work to any medium or format for the purpose of preservation and access in the future. Rutgers will not make any alteration, other than as allowed by this agreement, to the Work.I represent and warrant to Rutgers that the Work is my original work. I also represent that the Work does not, to the best of my knowledge, infringe or violate any rights of others.I further represent and warrant that I have obtained all necessary rights to permit Rutgers to reproduce and distribute the Work and that any third-party owned content is clearly identified and acknowledged within the Work.By granting this license, I acknowledge that I have read and agreed to the terms of this agreement and all related RUcore and Rutgers policies.
Back to the top

Technical

RULTechMD (ID = TECHNICAL1)
ContentModel
Document
CreatingApplication
Version
1.4
DateCreated (point = start); (encoding = w3cdtf); (qualifier = exact)
2016-11-27T20:04:06
DateCreated (point = start); (encoding = w3cdtf); (qualifier = exact)
2016-11-27T20:04:06
ApplicationName
iText 2.1.7 by 1T3XT
Back to the top
Version 8.3.10
Rutgers University Libraries - Copyright ©2019