TY - JOUR
TI - Integrated optimization method for plastic injection molding
DO - https://doi.org/doi:10.7282/T3H41VWH
PY - 2018
AB - This thesis presents a integrated optimization method to find the optimized operational parameters in Plastic Injection Molding (PIM), such as flow rate, melt temperature, mold temperature, pressure holding time and packing pressure that will minimize the shrinkage under the constraints of injection pressure and cooling time. Design of Experiments (DOE) is used to reduce the computational cost for simulations. Furthermore, the possibility value (P-value) is adopted to identify the significant factors among all design variables with respect to each functions. Monotonicity Analysis is then employed to detect the active constraints and to reduce the complexity of the original optimization problem so that the problem can be easily solved by a simple regression. Finally, the responses obtained by the simulation with the optimized operational parameters are used to validate our solutions. Two design examples are presented in this paper. For both examples, twenty-five initial samples are evaluated using Solidworks Plastic based on the orthogonal array from the DOE with five variables. There are two constraints on injection pressure and cooling time. P-value shows that packing pressure is not a significant factor for shrinkage and two constraints in both examples, then it can be moved out in later optimization. The exact value of flow rate and pressure holding time can be found out by Monotonicity Analysis. Finally, by solving the regression equations with melt temperature and mold temperature, the optimal parameters combination will be solved. Using the optimized parameters in simulation, the shrinkage for first example and second example are 0.3988mm and 0.0768mm, both of the shrinkage results are smaller than that in initial samples which can satisfy the constraints.
KW - Mechanical and Aerospace Engineering
KW - Mathematical optimization
KW - Injection molding of plastics
LA - eng
ER -