This work, describes the design, fabrication and testing of a microfluidic platform for the continuous extraction of blood plasma from a circulating whole blood sample in a clinically relevant environment to assist in continuous monitoring of a patient’s inflammatory response during cardiac surgeries involving extracorporeal circulation (ECC) procedures such as cardiopulmonary bypass (CPB) and extracorporeal life support (ECLS) procedures. The microfiltration system consists of a two-compartment mass exchanger with two aligned sets of PDMS microchannels, separated by a commercially porous polycarbonate (PCTE) membrane. Using this microdevice, blood plasma can be continuously separated from blood cells in a real-time manner with no evidence of bio-fouling or cell lysis. The technology is designed to continuously extract plasma containing diagnostic proteins such as complements and cytokines using a significantly smaller blood volume as compared to traditional blood collection techniques. The microfiltration device was evaluated using a simulated CPB circulation loop primed with donor human blood and in-vivo piglet model of ECLS in a manner identical to clinical surgical setup. The microfiltration device was able to continuously extract small volume of cell-free plasma from unmodified circulating blood in order to study the effects of system components and circulation on immune activation during CPB and ECLS procedures. The microdevice, with 200 nm membrane pore size, was able to continuously extract ~15% pure plasma volume (100% cell-free) with high sampling frequencies which could be analyzed directly following collection with no need to further centrifuge or modify the fraction. The simple and robust design and operation of these devices will allow surgeons and clinicians autonomous usage in a clinical environment to better understand the mechanisms of injury resulting from cardiac surgery, and allow early interventions in patients with excessive postoperative complications to improve surgical outcomes. The sufficient volume of plasma, high plasma protein recovery, absence of hemolysis and low level of biofouling on the membrane surface during the experimental period (over 5 hours) were all indications of effective and reliable device performance for future clinical applications. Ultimately, monolithic integration of this microfiltration device with a continuous microimmunoassay would create an integrated microanalysis system for tracking inflammation biomarkers concentrations in patients for point-of-care diagnostics, reducing blood analysis times, costs and volume of blood samples required for repeated assays. Additionally, the microfiltration technology proposed in this study was tested to continuously extract pathogens from undiluted blood (Hct>38%) for treating sepsis. A microfiltration device with a 2 μm pore-size PCTE membrane was fabricated and was used to separate E.coli from blood. Using this device approximately 5-6% of the E.coli was removed from the blood in the reservoir sample in each collected fraction resulting in a cumulative removal of 22% over a period of 80 minutes. These results demonstrate the ability of the microfiltration system to continuously remove bacteria from blood.
Subject (authority = RUETD)
Topic
Biomedical Engineering
RelatedItem (type = host)
TitleInfo
Title
Rutgers University Electronic Theses and Dissertations
Rutgers University. Graduate School - New Brunswick
AssociatedObject
Type
License
Name
Author Agreement License
Detail
I hereby grant to the Rutgers University Libraries and to my school the non-exclusive right to archive, reproduce and distribute my thesis or dissertation, in whole or in part, and/or my abstract, in whole or in part, in and from an electronic format, subject to the release date subsequently stipulated in this submittal form and approved by my school. I represent and stipulate that the thesis or dissertation and its abstract are my original work, that they do not infringe or violate any rights of others, and that I make these grants as the sole owner of the rights to my thesis or dissertation and its abstract. I represent that I have obtained written permissions, when necessary, from the owner(s) of each third party copyrighted matter to be included in my thesis or dissertation and will supply copies of such upon request by my school. I acknowledge that RU ETD and my school will not distribute my thesis or dissertation or its abstract if, in their reasonable judgment, they believe all such rights have not been secured. I acknowledge that I retain ownership rights to the copyright of my work. I also retain the right to use all or part of this thesis or dissertation in future works, such as articles or books.